The electronic water heater is not complicated in terms of design; hence issues that are not related to electrical work can be done by the owner. For more advice on electric heater maintenance only look for the Best Electric water heater repair.
Electric Water Heater Repair Plumbing Needs
Maintaining, cleaning, and tune-ups of the electric water heater regularly helps reduce problems such as noise, sediment buildup, no hot water, inadequate hot water, low pressure, and foul-smelling water. A well maintained and repaired water heater will be useful, reliable, and will have a long-term operation. The electronic water heater is not complicated in terms of design; hence issues that are not related to electrical work can be done by the owner. For more advice on electric heater maintenance only look for the Best Electric water heater repair in Ridgeland SC . Don’t hesitate to call BroadRiver Plumbing today!
The Point Checklist For Electric Water Heater
The previous day before maintaining or replacing an electric water heater, go through the manufacturer’s manual to prepare appropriate tools. When maintaining or replacing an electric water heater, you should check on the following parts of the electric heater; storage tank, heating elements, thermostats, temperature, and pressure relief valve, anode rod, and dip tube.
1. Inspection
You should check for any leakages, corrosion, obstructions, and distortions. Identify unusual conditions to prevent situations such as leaking, which arise from the rusty storage tank, and some lose connections, which leads to water at the bottom of the tank.
2. Draining And Flushing An Electric Water Heater
Tank type electric water faces problems such as mineral sediments, dirt, and deposits settling at the bottom of the heater, which leads to complaints relating to hard water. You avoid the problem by installing a water softener, which at the end might have its pros and cons. An electric water heater should be maintained frequently and correctly. Drainage helps the tank heating system to run smoothly. Drainage and flushing also help to remove the scale buildup from the heating elements as well as eliminating the hissing sound released when the heating elements cover with the limescale.
3. Testing The Thermostat
Testing the thermostats is an essential maintenance requirement. You can use tools such as multimeter for the testing. Bigger water heaters have two thermostats, while the smaller water heaters with a capacity of thirty gallons have one thermostat. The main aim of the thermostat examination is to check power coming to the elements and tighten the wires if they are lost. In case the water heater is old, put an insulation blanket around the tank to reduce energy loss.
4. Anode Rod Maintenance
Anode rod is also known as the sacrificial rod. The role of the anode rod is to protect the electric water heater from any rust or corrosion. It always deteriorates as the metal protects aggressive water action. The make of the sacrificial rod is of steel coated with magnesium compound and softer materials.
When the anode rod is adequately maintained and replaced when needed, it can last longer, and the lifetime of electric water heater increases. The difference made by the conditions and performance of the water heater is by simply checking the anode functioning status and also the selection of an anode when replacing the older one.
Trench a few gallons of hot water via the drain valve then remove the anode rod. Water quality is an essential factor; for instance, hardness and usage of water softener; hence frequent inspection is recommended at least once a year. Maintenance and repair of electric water heater is similar to that of gas water heater repair and maintenance.
5. Checking The Dip Tube
The dip tube is also called the cold-water inlet. Its use is to bring the cold water inside the water tank heater. Advanced heaters have better cold-water channels which last longer and assist in reducing the scale buildup inside the tank. The dip tube loses its functionality as the water heater ages and can break, crack, or even split. When this happens instead of bringing the cold water to the bottom of the tank, the distorted tube brings the water at the top of the heater, where it mixes with the hot water and delivering not as much hot water, leading to cold baths.
Professional Plumbing Company
